Precautions - Panasonic GP-US932CSXE Manual Del Usuario

Precautions

Stop the operation immediately when something is
wrong with this product.
When smoke goes up from this product or the smell of
smoke comes from this product, stop the operation imme-
diately and contact your dealer.
Turn the power off immediately and contact qualified service
personnel for service.
Do not attempt to disassemble or modify this product.
Failure to observe this may cause fire or electric shock.
Consult the dealer for the repair or inspections.
Do not insert any foreign objects.
This could permanently damage this product.
Unplug the power plug immediately and contact qualified
service personnel for service.
Do not use the product in an atmosphere of flamma-
ble gases.
Failure to observe this may cause an explosion resulting in
injury.
Avoid installing this bracket in the locations where
salt damage occurs or corrosive gas is produced.
Otherwise, the mounting portions will deteriorate and acci-
dents such as a fall of this product may occur.
Select an installation area that can support the total
weight.
Selecting an inappropriate installation surface may cause
the product to fall down or topple over, resulting in injury.
Reinforce the mounting point to the appropriate level before
mounting.
Turn the power off when cleaning this product.
Failure to observe this may cause electric shock.
Periodic inspections shall be conducted.
Rust on the metal parts or screws may cause a fall of the
product resulting in injury or accidents.
Consult the dealer for the inspections.
Avoid placing receptacles that contain liquids such as
water on or near the unit.
If liquid spills onto the unit, it may cause fire or an electric
shock.
Contact the dealer immediately.
Do not pull the cables.
Failure to observe this may cause injury.
Do not damage the cables.
Putting a heavy thing or pinching may damage the cables
and cause injury.
[Precautions for use]
To keep on using with stable performance
Parts of this product may deteriorate and it may shorten the
lifetime of this product when using in locations subject to
high temperatures and high humidity.
Use this product at temperatures between 0 °C to 40 °C.
Failure to observe this may adversely affect the components
inside or cause this product to malfunction. Use of this
product at temperatures of 30 °C or lower is recommended
without direct heat from heaters in consideration of heat
release at the product location.
Handle this product with care.
Do not drop this product, nor apply shock or vibration to the
product. It may cause a malfunction.
Do not aim this product at strong light sources.
A light source such as a spot light on a part of the screen
causes a blooming (light bleeding).
Blight subject
Blooming
Cleaning this product body
• Turn the power off, and then use a soft cloth to clean
this product. When the dirt is hard to remove, use a mild
detergent and wipe gently.
Then, wipe off the remaining detergent with a dry cloth.
• Do not use strong or abrasive detergents when cleaning
the body.
• When using a chemical cloth for cleaning, read the cau-
tion provided with the chemical cloth product.
7