Panasonic GP-US932CSXE Manual Del Usuario página 12

!9 12 V DC power terminal [DC 12V IN]
This connector is used to connect an external DC
power supply of 12 volts (3 A or more).
Compatible connector (as of September 2012): HR10A-
7P-4S (73) manufactured by HIROSE ELECTRIC
CO., LTD.
Pin array of the compatible connector
1 4
2 3
(Connector of the cable)
@0 Remote terminal [REMOTE]
This port is used to perform external control.
(D-sub 9-pin connector, male)
1
6
Pin No.
1
2
3
4
5
6
7
8
9
@1 S-video output connector [S-VIDEO]
This connector provides the luminance signal (Y) output
with synchronizing signal and color signal (C) output.
12
5
9
Signal
GND
TXD
RXD
DSR
GND
DTR
CTS
RTS
GND
@2 RGB/YPbPr output connector [RGB/YPbPr]
This connector provides the RGB signal (red, green, and
blue) output or the YPbPr signal (luminance, color differ-
ence B, and color difference R) output. The output sig-
nal can be set up with use of "OUTPUT SEL" in the
SETUP menu. (☞ Page 21)
(D-sub 9-pin connector, female)
5 1
9 6
Pin No. Output signal
1 GND
2 GND
3 R, Pr
4 G, Y
5 B, Pb
6 VIDEO
7 SYNC
8 GND
9 GND