Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
!5 Setting of vertical flip function [FLIP ENABLE]
Selection of "ON" or "OFF" determines whether or not to enable the vertical flip function by pressing the [g] or [h] button.
OFF (default): Locks the normal display.
OFF (FLIP): Locks the vertically flipped display.
ON (FLIP): Selects the vertically flipped display. The vertical flip function is still available.
ON: Selects the normal display. The vertical flip function is still available.
Note:
•
This function can be used in conjunction with the freeze function and electronic zoom function.
•
When "ON" is selected, "ON" can be changed to "OFF" or "OFF(FLIP)" also in the SEL menu.
!6 Setting of horizontal flip function [MIRROR ENABLE]
Selection of "ON" or "OFF" determines whether or not to enable the horizontal flip function by pressing the [g] or [h] button.
OFF (default): Locks the normal display.
OFF (MIRROR): Locks the horizontally flipped display.
ON (MIRROR): Selects the horizontally flipped display. The horizontal flip function is still available.
ON: Selects the normal display. The horizontal flip function is still available.
Note:
•
This function can be used in conjunction with the freeze function and electronic zoom function.
•
When "ON" is selected, "ON" can be changed to "OFF" or "OFF(MIRROR)" also in the SEL menu.
!7 Status display setting of vertical and horizontal flip function
[STATUS DISPLAY]
Selection of "ON" or "OFF" determines whether or not to display an arrow (↓: vertical flip, →: horizontal flip, and ↓→: vertical
and horizontal flip) by pressing the [g] or [h] button.
!8 Setting of the display format for the SD format [SD ASPECT]
Specifies the aspect ratio for the SD format.
SIDE CUT (default), SQUEEZE, LETTER BOX
16:9→4:3 SIDE CUT
30
16:9→4:3 SQUEEZE
16:9→4:3 LETTER BOX
Publicidad
Capítulos
Tabla de contenido
Solución de problemas
