Product Description And Specifica- Tions; Intended Use; Product Features - Bosch GBH 18V-26 Professional Manual Original

OBJ_DOKU-61647-001.fm Page 3 Wednesday, August 2, 2017 10:03 AM
3 | English
 Use power tools only with specifically designated bat-
tery packs. Use of any other battery packs may create a
risk of injury and fire.
 When battery pack is not in use, keep it away from oth-
er metal objects, like paper clips, coins, keys, nails,
screws or other small metal objects, that can make a
connection from one terminal to another. Shorting the
battery terminals together may cause burns or a fire.
 Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally oc-
curs, flush with water. If liquid contacts eyes, addition-
ally seek medical help. Liquid ejected from the battery
may cause irritation or burns.
Service
 Have your power tool serviced by a qualified repair per-
son using only identical replacement parts. This will en-
sure that the safety of the power tool is maintained.
Hammer Safety Warnings
 Wear ear protectors. Exposure to noise can cause hear-
ing loss.
 Use auxiliary handle(s), if supplied with the tool. Loss
of control can cause personal injury.
 Hold power tool by insulated gripping surfaces when
performing an operation where the cutting accessory
may contact hidden wiring. Cutting accessory contacting
a live wire may make exposed metal parts of the power tool
live and could give the operator an electric shock.
 Use appropriate detectors to determine if utility lines
are hidden in the work area or call the local utility com-
pany for assistance. Contact with electric lines can lead
to fire and electric shock. Damaging a gas line can lead to
explosion. Penetrating a water line causes property dam-
age.
 When working with the machine, always hold it firmly
with both hands and provide for a secure stance. The
power tool is guided more secure with both hands.
 Secure the workpiece. A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
 Always wait until the machine has come to a complete
stop before placing it down. The tool insert can jam and
lead to loss of control over the power tool.
 Do not open the battery. Danger of short-circuiting.
Protect the battery against heat, e. g., against
continuous intense sunlight, fire, water, and mois-
ture. Danger of explosion.
 In case of damage and improper use of the battery, va-
pours may be emitted. Ventilate the area and seek
medical help in case of complaints. The vapours can irri-
tate the respiratory system.
 Use the battery only in conjunction with your Bosch
power tool. This measure alone protects the battery
against dangerous overload.
 The battery can be damaged by pointed objects such as
nails or screwdrivers or by force applied externally. An
internal short circuit can occur and the battery can burn,
smoke, explode or overheat.
1 609 92A 3YU | (2.8.17)
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.

Intended Use

The machine is intended for hammer drilling in concrete,
brick and stone, as well as for light chiselling work. It is also
suitable for drilling without impact in wood, metal, ceramic
and plastic. Machines with electronic control and right/left ro-
tation are also suitable for screwdriving.
The light of this power tool is intended to illuminate the power
tool's direct area of working operation and is not suitable for
household room illumination.

Product Features

The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Quick change keyless chuck (GBH 18V-26 F)
2 SDS-plus quick change chuck (GBH 18V-26 F)
3 SDS-plus tool holder
4 Dust protection cap
5 Locking sleeve
6 Lock ring for rapid-change chuck (GBH 18V-26 F)
7 Vibration damper
8 Rotational direction switch
9 Handle (insulated gripping surface)
10 On/Off switch
11 Battery pack*
12 Release button for mode selector switch
13 Mode selector switch
14 Worklight
15 Button for depth stop adjustment
16 Auxiliary handle (insulated gripping surface)
17 Depth stop
18 Battery unlocking button
19 EPC switch (Electronic Precision Control)
20 Button for charge-control indicator
21 Battery charge-control indicator
22 Mounting for suspension strap
23 Securing screw for key type drill chuck(GBH 18V-26) *
24 Key type drill chuck (GBH 18V-26) *
25 SDS-plus adapter shank for drill chuck
(GBH 18V-26) *
26 Drill chuck mounting (GBH 18V-26 F)
27 Identification grooves
28 Chuck key(GBH 18V-26)
29 Front sleeve of the quick change keyless chuck
(GBH 18V-26 F)
Bosch Power Tools