Description Of Programming Menu; Description Of Service Menu - LAVAZZA LB2210 Manual De Instalación Y De Uso

10.4 10.4

Description of programming menu

Description of programming menu
Menu Menu
Password
1. Identifi cation 1.1. Machine code
1.2. Model
1.3. Version
1.4. Asset Number
2. Setup 2.1. Temperatures
2.1.1. Std. temperature
Default: 100°C
2.2. Programme doses
2.2.1. Dose water short
Default: 165
2.2.2. Dose water long
Default: 275
2.3. Prebrewing
Default: Medium
2.4. Ventilate
Default: No
2.5. Descale
2.5.1. Water hardness
Default: 1
2.5.2. Descal. warning
Default: Yes
2.6. Filter warning
Default: No
2.7. Credits
2.7.1. Credit control
Default: No
2.7.2. Credits warning
Default: No
2.8. Payment method
2.8.1. Enable system
Default: No
2.8.2. Display credit
Default: No
2.9 Grounds control
Default: Yes
3. Save energy 3.1. Stand-by enabled
Default: No
3.2. Ritardo stand-by
Default: 10
3.3. Monday
3.3.1. Switch on time
Default: 08.00
3.3.2. Switch off time
Default: 20.00
3.4. Tuesday
3.4.1. Switch on time
3.4.2. Switch off time
3.5. Wednesday
3.5.1. Switch on time
3.5.2. Switch off time
3.6. Thursday
3.6.1. Switch on time
3.6.2. Switch off time
3.7. Friday
3.7.1. Switch on time
3.7.2. Switch off time
3.8. Saturday
3.8.1. Switch on time
3.8.2. Switch off time
3.9. Sunday
3.9.1. Switch on time
3.9.2. Switch off time
4. Security 4.1. Password
Default: 000000
4.2. Service password
Default: 0000
5. Reset to default
6. Exit
Notes Notes
Required only if other than 0.
Machine identifi cation code.
Read only.
Read only.
Service provider identifi cation code.
Operating temperature when machine is
"warmed up".
Qty. small drink (it is a numerical parameter
without any physical equivalent, e.g. cc).
Qty. large drink (it is a numerical parameter
without any physical equivalent e.g. cc).
Prebrewing time.
Enables/disables rinse cycle when machine is
switched on (this function will only be performed
when the machine is cold).
Range: 0-4 - Water hardness setting to
determine the quantity of water after which the
machine will signal a descaling alarm.
0 = disables the descale control function.
Enables/Disables display of descaling alarm.
Enables/Disables display of an alarm message
indicating that the fi lter needs replacing.
Enable/Disable the dispensing control via credit
management.
Enable/Disable the display of alarms "Credit
low" and "No credit"
Enables/Disables brewing/dispensing
means of an external coin mechanism.
Enables/Disables display of the amount inser-
ted in the coin box.
It enables/disables the machine to brew without
checking the number of used pods in the dump
box.
Enables/disables stand-by function.
Elapsed time in minutes since last use before ma-
chine switches off when in the Stand-by time band.
It enables you to program the machine ON/OFF
times for Monday.
It enables you to program the machine ON/OFF
times for Tuesday.
It enables you to program the machine ON/OFF
times for Wednesday.
It enables you to program the machine ON/OFF
times for Thursday.
It enables you to program the machine ON/OFF
times for Friday.
It enables you to program the machine ON/OFF
times for Saturday.
It enables you to program the machine ON/OFF
times for Sunday.
sets the password for accessing the
programming menu (6 digits)
sets the password for accessing the service
menu (4 digits)
selecting "Yes" will restore all default settings
Press ENTER to quit.
10.5 10.5

Description of service menu

Description of service menu
Menu Menu
Password
1. Date & Time 1.1. Time
1.2. Date
1.2.1. Day
1.2.2. Month
1.2.3. Year
1.2.4. Day of the week
2. Audit 2.1. Total from reset
2.1.1. Total from reset
2.1.2. P1 from reset
2.1.3. P2 from reset
2.1.4. P3 from reset
2.1.5. Last Reset
2.1.6 Reset Audit
2.2. Total from init
2.2.1. Total from init
2.2.2. P1 from init
2.2.3. P2 from init
2.2.4. Pr3 from init
2.2.5. Last init
3. Brew unit wash
by
4. Descale 4.1. Qty till descale
4.2. Final descale
4.3. Do it now
5. Enable fi lter
6. Errors 6.1. Error log
6.1.1. Display of errors
with up/down keys
6.2. Reset log
6.3. Errors reset
7. Credits 7.1. Add credits
7.2. Zero credits
7.3. Alarm level
8. Exit
Notes Notes
Required only if other than 0
Sets the current time
Number of total products since last reset
Number of type 1 products (espresso) since
last reset
Number of type 2 products (long coffee) since
last reset
Number of type 3 products (free cycle) since
last reset
Read only - Date and time of last reset
Selecting "Yes" will clear all partial counters
Number of product totals since the beginning
of the machine's life
Number of type 1 products (espresso) since
the beginning of the machine's life
Number of type 2 products (long coffee) since
the beginning of the machine's life
Number of type 3 products (free cycle) since
the beginning of the machine's life
Read only - Date and time of last initialization
Washing of the brew group is performed
Remaining quantity of water to be dispensed
before having to perform next decalcifi ca-
tion (expressed in litres).
Date and time of last descaling.
Pressing "Enter" will launch a descaling cycle.
The new fi lter installed in the machine
undergoes a rinse cycle.
The last N errors can be displayed: index 0
= error of oldest date. May be accessed
only if there is at least one error.
Selecting "Yes" will delete the list of the last
errors.
Selecting "Yes" will cancel any Out-of-Service
conditions that do not automatically reset.
The value indicates the number of credits that
0 are to be added to those already in the
machine.
Select "Yes" to zero all credits in the machine.
Default: No
The value indicates the quantity of residual
0 credits below which the message "Credit
low" is displayed
Note: the message is only displayed if
enabled.
Press ENTER to quit.
• 15 •