Installation Of The 2 Nd Bike; Start-Up - Sigma BC 1909 HR Manual Del Usuario

2 ASSEMBLY
INStALLING tHE tRANSMIttERS –
SPEED AND CADENCE
k Both transmitters can either be installed with cable ties
(permanent attachment) or optionally using the O-rings.
k In order to achieve the necessary 12 mm or less install the transmittter
and the magnet closer to the wheel hub.
INStALLING tHE MAGNEtS –
SPEED AND CADENCE/
PUttING oN tHE CHESt BELt
k Rub water or cardio-gel on the electrodes.
2.1 INStALLAtIoN oF tHE 2
Switching between BIKE 1 and BIKE 2 is automatic.
A second speed transmitter must be used.
(Accessory set "BIKE 2" Ref. No.: 00417,
"BIKE 2 incl. cadence" Ref. No.: 00415)

3 StARt-UP

For reasons of energy consumption, the BC 1909 HR is supplied
without a battery.
Please insert the battery by opening the battery compartment
cover with the tool provided. Once you have inserted the battery,
close the battery compartment with the aid of the tool.
The display automatically jumps to setting mode.
BIkE
ND
5 6 7
12 13 14
17
21 22
BC 1909 HR
8
9
15 16
18 19
23 24
10 11
1909
29