Setting Up Your Printer On A Macintosh Computer - HP Business Inkjet 2200 Manual De Usuario

2. Insert the Starter CD into your CD-ROM drive. The installation
program runs automatically.
If the installation program does not run automatically, click Start,
select Run, and at the command line box, type the letter of your
computer's CD-ROM drive followed by: \SETUP (for example,
type D:\SETUP).
3. Click Install Printer Driver from the Starter CD menu.
4. Select the language of the printer software that you want to install
and click OK.
5. Click Next and then click Accept to accept the terms of the license
agreement.
6. Select Connected via the network.
7. Select Client Setup if the printer is connected to a server or
someone's machine. Select Server or Peer-to-Peer Setup if you are
setting up a print server for the first time, or if you will print directly to
HP JetDirect EIO print server installed in your printer. If you are not
sure how to connect your network printer, ask your network
administrator, or see the next section, Network Printing for more
information.

Setting Up Your Printer on a Macintosh Computer

Connect your printer to a Macintosh computer via an HP JetDirect print
server.
Before connecting your printer to the JetDirect server, make sure your
printer is an:
 HP Business Inkjet 2250 printer with an HP JetDirect card, or
 HP Business Inkjet 2200 printer with the HP Postscript/PCL5 Kit
upgrade and an HP JetDirect card.
These cards can be purchased as accessories (see HP Supplies
and Accessories for more information).
1. Connect the Ethernet cable to the printer and the JetDirect server.
3-3