82K; Black 7/8" Machine Screw - Sauder Jaclyn Smith 416403 Manual Del Usuario

Step 15
Insert a SLIDE CAM (10A) into the DRAWER SIDES (D132 and D138).
å
Fasten the EXTENSION SLIDES (P) to the DRAWER SIDES (D132 and D138). Use four GOLD 5/16"
å
FLAT HEAD SCREWS (3S).
NOTE: The screw head in the CAM must be visible through the slotted hole in the SLIDE.
å
Fasten two PULLS (82K) to the DRAWER FRONT (L). Use two BLACK 7/8" MACHINE SCREWS (37S).
å
Repeat this step for the other drawers.
å
P
www.sauder.com/services
Open end
10A
D138
L

82K

BLACK 7/8" MACHINE SCREW

(6 used in this step)
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
D132
GOLD 5/16" FLAT HEAD SCREW
416403
37S
10A
(6 used)
Open end
P
3S
(12 used in this step)
Page 19