Sauder Jaclyn Smith 416403 Manual Del Usuario página 9

Step 5
Insert four METAL PINS (1R) into the HUTCH UPRIGHT (E).
å
Insert the METAL PINS (1R) in one end of the HUTCH
å
UPRIGHT (E) into the holes in the HUTCH LEFT END (D).
Fasten the HUTCH RIGHT END (C) to the TOP (F2). Use
å
two BLACK 1-7/8" FLAT HEAD SCREWS (2S).
NOTE: Be sure the METAL PINS (1R) in the HUTCH
å
UPRIGHT (E) insert into the HUTCH RIGHT END (C).
www.sauder.com/services
D
F2
BLACK 1-7/8" FLAT HEAD SCREW
E
Flat edge
F i n
2S
(2 used in this step)
416403
(4 used)
1R
i s h
e d
s u
r f a
c e
C
Surface without
TWIST-LOCK®
FASTENERS
Page 9