Black 1-9/16" Flat Head Screw; Hidden Cam - Sauder Jaclyn Smith 416403 Manual Del Usuario

Step 14
The tabs should insert freely into the
1
slots. Gently tilt the DRAWER SIDES side
to side until the tabs slip into the slots.
D132
L
Groove
Insert the DRAWER SIDES (D132 and D138)
å
at an angle into the slot at each end of the
DRAWER FRONT (L).
3
Minimum
190 degrees
J
Surface with

HIDDEN CAM

Fasten the DRAWER BRACE (J) to the DRAWER
å
FRONT (L). Tighten one HIDDEN CAM.
Page 18
D138
Maximum
Arrow
210 degrees
L
VIEW THE T-LOCK BOX VIDEO
With the palm of your hand, tap the
2
DRAWER BOTTOM down into the groove.
U N
F I N
D132
L
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
Slide the DRAWER BOTTOM (D601) into the
å
grooves in the DRAWER SIDES (D132 and D138) and
DRAWER FRONT (L).
4
D132
J
Fasten the DRAWER BACK (D197) to the DRAWER
å
SIDES (D132 and D138) and DRAWER BRACE (J). Use five
BLACK 1-9/16" FLAT HEAD SCREWS. (30S). Repeat this
step for the other DRAWERS.
416403
I S H
E D
D601
D138
Start each screw a few turns before
completely tightening any of them.
30S

BLACK 1-9/16" FLAT HEAD SCREW

(15 used in this step)
D197
D138
www.sauder.com/services