Taking Measurements - Fora D40 Pro Manual Del Propietário

Taking Measurements

This meter provides three different ways to measure the blood
pressure.
● Taking a Single Measurement
Always apply the pressure cuff before turning on the meter.
NOTE:
 If you press
If the pulse rate symbol is shown as "

of symbol means the heart beat period deviating from the mean heart beat
by greater than 25%.
● Measurement Average Mode
Always apply the pressure cuff before turning on the meter.
22
1. Press
appear. The cuff will begin to inflate
automatically.
2. The heart symbol " "will flash when
a pulse is detected during the inflation.
3. After the measurement, the meter
displays the systolic pressure, diastolic
pressure and pulse rate.
4. Press
switch off automatically after left idle for
3 minutes.
during measurement, the meter will be turned off.
1. Press
enter the averaging mode. The cuff will
begin to inflate automatically.
. All the LCD symbols will
to switch off. Or it will
" instead of " ", the appearance
. The meter will turn on and