Reviewing Day Average Results; Measuring Mode - Fora D40 Pro Manual Del Propietário

Reviewing Day Average Results

NOTE:
Any time you wish to exit the memory, press

idle for 3 minutes. The meter will turn off automatically.
 Control solution results are NOT included in the day average.
If there are no records in memory, "---" displays when you recall the test

results or review the average results. This indicates that there is no test
result in the memory.
 The blood glucose test results of Lo and Hi will NOT be calculated in the day
average results.
26
1. Press and hold M button.
When " " appears on the display, keep
pressing M button for 3 seconds until
the flashing
button and then the 7-day average
result measured in general mode will
appear on the display.
2. Press M button to review
14-, 21-, 28-, 60- and 90- day average
blood glucose results stored in each

measuring mode.

3. Press S button to review
7-, 14-, 21-, 28-, 60- and 90- day
average blood pressure results stored in
each measuring mode.
3. Exit the meter memory
Press button and the meter will turn
off.
appears. Release M
button or leave the meter