Test Strip - Fora D40 Pro Manual Del Propietário

Test Strip

Absorbent Hole
Apply a drop of blood
here. The blood will be
automatically absorbed.
Test Strip Handle
Hold this part to insert
the test strip into the
ATTENTION:
The front side of test strip should face up when inserting
test strip.
Test results might be wrong if the contact bar is not fully
inserted into the test slot.
NOTE:
 The FORA D40 Pro Blood Glucose Plus Blood Pressure Monitoring System
should only be used with FORA D40 Pro Test Strips. Using other test strips
with this monitoring system can produce inaccurate results.
meter slot.
Confirmation Window
This is where you confirm
if enough blood has been
applied to the absorbent
hole in the strip.
Contact Bars
Insert this end of the test
strip into the meter. Push
it in firmly until it stops.
7