Reversing Door Procedure - Alliance Laundry Systems D009C Instalación/Operación

Reversing Door Procedure

NOTE: Doors with windows cannot be reversed.
1
Remove four hinge
attaching screws.
3
Pull bottom of door
liner out, then pull
down, removing
door liner from
door panel.
5
Remove door strike
from door liner and
reinstall on opposite
side.
7
Reinstall nine
screws removed in
step 2.
510975
D675I
B
A
D312S
D312S
D314S
D314S
D316S
D316S
9
Reinstall four hinge
attaching screws
removed in step 1.
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
The door on this dryer is completely reversible. To
reverse door proceed as follows:
2
Remove all nine
screws.
D675S
4
Rotate door panel
180 degrees as
shown.
6
Insert liner under
flange on bottom of
door, then push top
of door liner into
place.
8
Using a screwdriver,
remove two door
plugs, and reinstall on
opposite side of door
opening.
Installation
B
A
D606I
D606I
D311S
D311S
D313S
D313S
D315S
D315S
D317S
D317S
21