How To Hang Your Ceiling Fan - Fanimation The inlet FPS7880 Serie Manual Del Propietário

▲WARNING
The fan must be hung with at least 7´ of clearance from
floor to blades (Figure 1)
▲WARNING
To avoid possible electrical shock, be sure electricity is
turned off at the main fuse box before hanging.
NOTE: If you are not sure if the outlet box is grounded,
contact a licensed electrician for advice, as it must be
grounded for safe operation.
▲WARNING
It is critical that the outlet box and the screws are
securely anchored to the building structure and capable
of withstanding a load of at least 50 lbs. Failure to verify
that the screws are properly installed could result in the
fan falling. (Figure 2)
1 . Securely attach the ceiling junction box acceptable for
ceiling support into the building structure. (Figure 2)
2. Securely attach the ceiling bracket to the ceiling junction
box as shown. (Figure 3)
3 . Hang the Motor Assembly as shown. (Figure 4) You can
now proceed with the electrical wiring of your fan.

How to Hang Your Ceiling Fan

5
Ceiling
Floor
Figure 1
NOTE: Supply wires
Figure 2
omitted for clarity
NOTE: Supply wires
Figure 3
omitted for clarity
Ceiling
Figure 4
No
less than
7 ft
Outlet Box
Junction Box
Screws (2)