Memory - MACHEREY-NAGEL PF-12 Manual

4. Memory

In the standard mode of operation the memory is activated, indicated by a ✔ in
the upper start display. The configuration menu allows to activate / deactivate
memory completely.
For memory administration press
will read either,
or, if any measuring values are stored, e.g.
The memory administration offers several options for handling data. Using
/
you can select one of the four options.
Output
When you press key
Interface to a terminal programme.
Display
When you press
. Using allows you to return to the last-displayed value. By pressing
confirming with
Delete
When you press
more, all data or the selected data are deleted from the memory.
Select
When you press key
The following options for selection are available:
Method / Location / Date / Time
Disposal in accordance with EU directive 2002/96/EC
In compliance with EU directive 2002/96/EC, MACHEREY-NAGEL will accept back and
dispose of the old instrument at no cost.
ATTENTION!
It is not allowed to dispose of the instrument using municipal waste disposal
services. Please talk to your local MACHEREY-NAGEL contact.
MEM.
at this point, all stored data are transferred via the USB-
OK
at this point, you can display all data sets in sequence using
OK
you can delete any data set.
OK
at this point, and confirm deletion by pressing
OK
at this point, you access the selection mode.
OK
in the method selection mode. The display
and
MEM.
once
OK
19