Instale La Ducha De Mano - Todas - Kohler K-8973 Guía De Instalación Y Cuidado

Instale la ducha de mano - Todas

Enrosque el extremo de la manguera con el arosello y la arandela de rejilla a la
ducha de mano.
Enrosque el extremo de la manguera con tuerca y arandela a la salida del
desviador en la parte de abajo del cuerpo del llenador de bañera.
Apriete bien ambos extremos de la manguera con una llave.
Deslice la ducha de mano en el soporte de la ducha de mano.
10.
Complete the Installation - All
Bath Filler
Remplisseur de baignoire
Llenador de bañera
Diverter Button
Bouton inverseur
Botón del desviador
Handle
Poignée
Manija
NOTE: The black inserts located in the spout and handshower holder can be
exchanged with the provided white or green inserts.
Ensure all connections are tight.
Gently remove the colored trim piece by lifting up and sliding it out of the spout
end.
Turn on the main water supply.
Tilt down and rotate the faucet handle to the full hot position. Run hot water
through the spout for one minute to remove any debris.
Rotate the faucet handle to the full cold position. Run cold water through the
spout for about one minute to remove any debris.
Check for leaks. Adjust as needed.
Lift the handshower out of the handshower bracket.
Pull the diverter button to activate the handshower.
Check for leaks at each end of the handshower hose. Adjust as needed.
Return the handle to a level position to turn the water off.
Place the handshower back into the handshower bracket.
Lubricate the spout insert with soap and reinstall it.
1169172-2-A
Insert
Insertion
Inserto
Handshower
Douchette
Ducha de mano
Insert
Insertion
Inserto
22 Kohler Co.