Declaration Of Conformity; Technical Specifications - stayer SCR315W Manual De Instrucciones

14.2 Repair service of the manufacturer or
commercial agent:
Stayer Ibérica S.A.
Área Empresarial de Andalucía - Sector 1
C/ Sierra de Cazorla, 7. CP.28320
Pinto (Madrid) Spain.
15. Warrantee
Warrantee card
You will find the warrantee card among the documents
belonging to the tool. You must fill in the warrantee card
completely and attach a copy of the purchase ticket or
invoice thereto, and give it to your distributor against the
corresponding acknowledgement of receipt.
Should this card be lacking, immediately re-
Observation!
quest your distributor to furnish it.
The warrantee is limited solely to manufacturing or me-
chanization failures, and it ceases to exist when parts
thereof have been disassembled, manipulated or repaired
out of the manufacturing plant.
16. Disposal
We recommend subjecting electric tools, accessories and
packaging to a recovery process that respect the environ-
ment.
Do not throw away electric tools!
For EU countries only:
In accordance with European Directive
2012/19/UE on unserviceable electric and
electronic apparatus, after transposition into
national law, electric tools must be collected
separately to subject them to ecologic recy-
cling.
Subject to change without notice.

17. Technical specifications

= Power input
= No-load speed
= Weight
L = Sound pressure level
pA
L = Sound power level
WA
= Protection class
The values given are valid for nominal voltages [U]
230/240 V ~ 50/60 Hz - 110/120 V ~ 60Hz. For lower vol-
tage and models for specific countries, these values can
vary. Please observe the article number on the type plate
ENGLISH
12
of your machine. The trade names of the individual machi-
nes may vary.

18. Declaration of conformity

EU DECLARATION OF CONFORMITY. The undersigned:
STAYER IBERICA, S.A.
With address at:
Calle Sierra de Cazorla, 7
Área Empresarial Andalucía - Sector 1
28320 PINTO (MADRID)
Tel.: +34 91 691 86 30
We declare under our own responsibility that the
product as describe und "Technical data" is in con-
formity with the following standards or standardi-
zed documents: 2006/42/EC, 2014/30/EU, 2011/65/
EU, in accordance with the provisions in Directives:
EN 61029-1, EN 61029-2-11, EN 55014-1, EN 55014-2,
EN 61000-3-2, EN 61000-3-3, EN 50581.
Fdo.: Ramiro de la Fuente
Director General
January 2019.
12