Using Your Machine To Clean Up High - Hoover BH52210 Manual De Instrucciones

Using your machine to clean up high:

The reach wand can be used for hard to reach places.
3
13
Press the Power Head/
accessory release clip
and pull to remove the
Powered Head from the
reach wand.
Push the chosen
accessory into the
reach wand until it
clicks into place.
2
Choose an accessory
(pictures illustrated dependent
upon model).
Squeeze the trigger located
underneath the handle, the
machine will switch 'On'. The
On/Off and charging light will
illuminate green indicating the
4
power is on and the machine is
charged. Release the trigger to
switch the machine 'Off'.
see next page