Before you begin cleaning:
WARNING
!
To reduce the risk of personal injury,
remove battery before cleaning
or servicing.
Slide the battery into
the back of the handheld.
The battery will click
into position when
correctly fitted.
!
2
To charge the machine,
detach the reach wand
and lie the handheld on
its side on a flat stable
surface. You can also
charge the machine
while attached to the
wall mount. Make sure
the floorhead and wand
are attached together.
• IMPORTANT •
For best cleaning results, filters require cleaning at least
every 3 months and should be replaced every 12 months
depending upon use. If the vacuum cleaner is blocked,
remove the battery before removing the blockage.
3
Insert the charger lead
into the charger inlet
located on the back of
the handle.
4
Plug the charger plug
into the outlet.
see next page
8