Iso - Olympus CAMEDIA D-450ZOOM Manual De Instrucciones

LCD Monitor
Écran ACL
Monitor LCD
NEXT
124
Menu button
Touche de menu
Botón de menú
+/– buttons
Touches (+/–)
Botones +/–
160 320 640
S ET
OK button
Touche OK
Botón OK
Control panel
Écran de commande
Panel de control
E
You can set the ISO sensitivity to AUTO, 160, 320 or 640.
1
Press the Menu button in the Record mode, and select

ISO.

2
Select the ISO setting with the +/– buttons.
3
Press the OK button to confirm the setting.
Press the Menu button to cancel the setting and go to the
next setting menu.
The ISO mark appears on the control panel when a setting
other than AUTO is selected.
The higher the ISO, the faster the shutter speed that can
be used and the lower the amount of light required, but the
grainier the pictures will appear.
When AUTO is selected, the sensitivity increases
automatically in low-light situations.
The sensitivity scale is based on the one used for picture
film, but the numbers are for reference only.
ISO