Tabla de contenido
Publicidad
LCD Monitor
Écran ACL
Monitor LCD
NO
144
Erase button
Touche d'effacement
Botón de borrado
3
OK button
Touche OK
Botón OK
YES
3
E
ONE-FRAME ERASE
You can delete pictures you do not want.
When the picture is protected or the write-protect adhesive
seal is placed on the card, the camera does not enter the
Erase mode.
1
Display the picture you want to erase.
2
Press the Erase button until the One-Frame Erase
indicator in the upper right corner of the LCD monitor
lights.
To cancel, press the Erase button again.
3
Press the OK button to erase the selected picture.
The camera makes a short single beep and the selected
picture is erased.
One-Frame erase is also available in the Index-Display
mode. (p. 134)
See page 150 for performing All-Frame erase.
It may take longer to erase when Print Reserve has been
set in the card.
Caution:
Never open the card cover, eject the card,
remove the batteries, or pull the plug while
erasing pictures. It may destroy the data in the
card.
Do not press the Erase button while an image is
being loaded onto the LCD.
Publicidad
Tabla de contenido
