All-Frame Erase - Olympus CAMEDIA D-450ZOOM Manual De Instrucciones

LCD Monitor
Écran ACL
Monitor LCD
NEXT
150
Menu button
Touche de menu
Botón de menú
+/– buttons
Touches (+/–)
Botones +/–
S ET
OK button
Touche OK
Botón OK
E

ALL-FRAME ERASE

This function works when the lens barrier is closed.
1
Display a picture, then press the Menu button.
2
Press the – button to select All-Frame erase
Press the Menu button to cancel.
3
Press the OK button to erase all pictures.
The camera makes a short single beep and the All-Frame
Erase indicator starts moving to the right.
4
All pictures are erased after a few seconds. The blue
background display will appear on the LCD monitor.
If there are any protected pictures, they will not be erased
and the protected picture last taken will be displayed when
the erasing operation is completed.
All-Frame Erase is also available in the Index-Display
mode. (p. 134)
Caution:
Be careful not to erase important picture data by
mistake as it cannot be retrieved.
Never open the card cover, eject the card, remove the
batteries, or pull the plug while erasing pictures. It
may destroy the data in the card.
Do not press the Erase button while an image is
being loaded onto the LCD.
.