Operation; Initial Use - ULTIMATE SPEED UMK 10 C2 Instrucciones De Utilización Y De Seguridad

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

cable. Protect the cable from heat, oil
and sharp edges.
Only connect the connection cable to
the cigarette lighter socket in the car.
Follow the instructions of your automaker
on using the cigarette lighter socket.
If the cable is damaged, immediately
unplug from the cigarette lighter
socket.
The connection cable on this device
cannot be replaced. Dispose of the de-
vice if the cable is damaged.
50 GB/MT

Operation

Initial use

Place the product on a level, non-flammable surface. Do
not cover the vents. Do not operate the device in dusty
environments. Doing so poses a fire hazard and could
damage the device.
For inflatables with counterpressure (e.g. partly filled car
tyre): Switch on the product before connecting the con-
nection valve
to the tyre.
7
Note: Depending on the inflatable you can use the
connection valve
directly or along with the included
7
valve adapters
(see Fig. A).
10
Connecting to the cigarette lighter socket:
Note: Verify the socket of the cigarette lighter in your vehicle
has an adequately sized fuse.
Verify the product is switched off: on / off switch
position "0".
Plug the cigarette lighter plug
12 V cigarette lighter.
to
6
into the socket of the
5

Publicidad

Tabla de contenido
loading

Tabla de contenido