Klarstein Grillkern Manual De Instrucciones página 22

EN
22
Step 7: Assembling the pedestal
The pedestal is disassembled in:
• 1 x cross element
• 4 x short tubes
• 4 x long tubes
• 8 x pipe end caps.
First take the cross element in your
hand. Hold it correctly when the
cover side of the center piece is
closed. (There are also studs on the
underside).
Otherwise, turn the part over.
Now push the short tubes onto the
upper ends of the cross element.
Now also push the long tubes
onto the lower ends of the cross
element.
The stand should now be narrower
towards the top.
Once you have assembled
everything correctly, press a pipe
end cap onto all open tube ends
(see figure 12).
Now you can place your grill on
the pedestal. The feet of the grill
pan are to be placed on the short
pieces of pipe. To do this, carefully
lower the grill from above. Make
sure that all tube ends are located
in the feet of the grill tray (see
figure 13).
Figure 12
Figure 13