Setting Operation - Timex INDIGLO Manual Del Usuario

SET
MODE
10
START / SPLIT
INDIGLO®
STOP / RESET

Setting Operation

When setting Time of Day, Alarms or the Countdown Timer
and so on, the button functions change from what is print-
ed on the case.
NOTE: These setting functions are the same in any mode
where you can set a value.
1. Press and hold the SET button. While you are holding
the button, "HOLD ADJUST" will appear on the display.
2. After a couple of seconds, the "HOLD" message will
disappear followed by a flashing value.
3. Change the flashing value by pressing either
START/SPLIT (to increase) or STOP/RESET
(to decrease). Press and hold the button to
increase/decrease the value quickly.
4. When the flashing value is set as intended, press
MODE to advance to the next value.
11