Kohler K-73078 Guía De Instalación Y Cuidado página 10

Rubber
To spout diverter.
Gasket
Nut
High-Pressure
Hose
7. Install the Handshower
Run cold and hot water through the shower outlet to flush out
dirt and debris.
Insert the screen washer into the outlet end of the elbow, and
thread the elbow onto the handshower. Adjust the position of the
elbow as needed so the installed handshower will lean over the
bath rim.
Fit a rubber gasket into the tapered end of the handshower hose,
and securely handtighten the handshower hose to the elbow.
Fit a rubber gasket into the handshower hose, and securely hand
tighten the handshower hose to the high-pressure hose.
Feed the hoses into the hose guide.
Fit a rubber gasket into the end of the high-pressure hose, and
securely wrench tighten the high-pressure hose to the spout
diverter.
1276522-2-A
Inlet
Elbow
Screen Washer
Rubber Gasket
Handshower Hose
10 Kohler Co.