Alarms; Set Daily Alarm; Set Pre-Alarm - Oregon Scientific BAR826HG Manual De Usuario

ALARMS

This product has 2 alarms: The Daily Alarm and a Pre-
Alarm for snowy weather. The Daily Alarm can be set to
go off at the same time every day. The Pre-Alarm sounds
only when the Daily Alarm is activated and the recorded
temperature from Channel 1 Sensor falls to 2°C (35.6°F)
or below.

SET DAILY ALARM

1. Press MODE to navigate to the Clock Area.
show next to the Area.
2. Press / to view the alarm. (AL will show at
the top.)
3. Press and hold
4. Select the hour and minute. Press
change settings.
5. Press / to confirm.
6. The Daily Alarm icon
is set.
P/N:086-003808-011 REV1
14/162
BAR826HG_UM_EN.P65
will
/ for 2 seconds.
or
will appear when the alarm
13

SET PRE-ALARM

The Pre-Alarm can be set to sound 15, 30, 45, or 60
minutes before the Daily Alarm. It will sound whenever
the recorded temperature from Channel 1 Sensor falls
to 2°C (35.6°F) or below.
For example, if you set the alarm to 7:00 AM, and the
Pre-Alarm to 45 minutes, the Pre-Alarm will sound at
6:15 AM provided the outdoor temperature at Channel
1 Sensor is 2°C or below.
1. Set up and activate the Daily Alarm.
2. Press / to switch to Pre-Alarm view.
(PRE-AL will show at the top.)
3. Press and hold
to
4. Press or to select 15, 30, 45 or 60 minutes. This
is the amount of time the Pre-Alarm will sound
BEFORE the Daily Alarm. The Pre-Alarm is
automatically activated when you select a time.
5. Press / to confirm.
shows when the Pre-Alarm is set.
NOTE
The Daily Alarm will NOT function until the next
day if the Pre-Alarm has been triggered. Also, if you
deactivate the Daily Alarm, the Pre-Alarm is
automatically deactivated.
13
2005.3.8, 11:21 AM
/ for 2 seconds.