Activate Alarm; Snooze; Barometer; View Barometer Area - Oregon Scientific BAR826HG Manual De Usuario

ACTIVATE ALARM

Navigate to the Clock Area, then press
to Daily Alarm or Pre-Alarm view. To activate or
deactivate the alarm, press
When the alarm time is reached, the backlight will be on
for 8 seconds and crescendo alarm will sound for 2
minutes. Press any key (except snooze) to silence the
alarm. It will sound at the same time the next day.

SNOOZE

Press SNOOZE/LIGHT to temporarily disable the alarm
for 8 minutes. or will blink while snooze is on.

BAROMETER

This product tracks fluctuations in barometric pressure
to provide the weather forecast, and the current and past
24 hours barometric pressure history measurements are
recorded by the main (indoor) unit.

VIEW BAROMETER AREA

Press MODE to navigate to the Barometer Area.
P/N:086-003808-011 REV1
15/162
BAR826HG_UM_EN.P65
/ to switch
or .
14
14

SELECT MEASUREMENT UNIT

Slide the mb / inHg switch (in the clock battery
compartment), to change the display unit.

VIEW BAROMETER HISTORY

Navigate to the Barometer Area. Then press MEM
repeatedly to scroll through the measurements. The
number shown in the HR box indicates how long ago
each measurement was taken (e.g. 2 hours ago, 3 hours
ago, etc.).

SET ALTITUDE

Set the altitude to match how far above or below sea
level you are living. This ensures that the barometric
pressure readings are accurate.
1. Navigate to the Barometer Area.
2. Press and hold MODE for 2 seconds.
3. Press or to set the altitude in 10-metre
increments (-100m to 2500m).
4. Press MODE to confirm.
2005.3.8, 11:21 AM