Set Pre-Alarm; Activate Alarm; Snooze - Oregon Scientific BAR998HGN Manual Del Usuario

SET PRE-ALARM

The Pre-Alarm can be set to sound 15,30,45, or 60 minutes
before the Daily Alarm. It will sound whenever the recorded
temperature from Channel 1 Sensor falls to 2°C (35.6°F)
or below.
For example, if you set the Alarm to 7:00 AM, and the Pre
Alarm to 45 minutes, the Pre-Alarm will sound at 6:15 AM
provided the outdoor temperature at Channel 1 Sensor is
2°C or below.
1. Set up and activate the Daily Alarm.
2. Press ALARM / to switch to Pre-Alarm view.
( will show at the top.)
3. Press and hold ALARM /
4 . Press UP or DOWN to select 15, 30, 45 or 60 minutes.
This is the amount of time the Pre-Alarm will sound
BEFORE the Daily Alarm. The Pre-Alarm is
automatically activated when you select a time.
5. Press ALARM / to confirm.
shows when the Pre-Alarm is set.
NOTE The daily Alarm will NOT function until the
next day once if the Pre-Alarm has been triggered.
Also, if you deactivate the Alarm, the Pre-Alarm is also
automatically deactivated.
for 2 seconds.

ACTIVATE ALARM

Navigate to the Clock
Area, then press ALARM
/ to switch to Daily
Alarm or Pre Alarm view.
To activate or deactivate
the alarm, press UP or DOWN.
When the Alarm time is reached, the crescendo alarm will
sound for 2 minutes. Press any key to silence the alarm.
It will sound at the same time the next day.
ICON
-:—

SNOOZE

Press SNOOZE / LIGHT to temporarily disable the Alarm
for 8 minutes. or
11
DESCRIPTION
Daily Alarm is activated and will
sound at the set time.
Pre-Alarm is activated and will
sound at the specified time if the
temperature falls to 2°C or below
(35.6 °F).
Alarm is not activated and will
not sound.
will blink while Snooze is on.