Elements Of The Complete Installation - Erreka TOPO Guía Rápida De Instalación Y Programación

TOPO
Quick installation and programming guide
This quick guide is a summary of the complete installation manual. The manual contains safety warnings
IMPORTANT and other explanations which must be taken into account. The installation manual can be downloaded by
NOTE going to the "Downloads" section of Erreka website:
http://www.erreka.com/Automatismos/descargaDocumentos.aspx
TA
Electrical cabling
A: Main power supply
B: Flashing light
C: Photocells (Tx/Rx)
D: Pushbutton or key switch
E: Operator (motor / encoder)
F: Antenna

Elements of the complete installation



MOTOR
2
2x1mm
ENCODER
2
2x0,5mm
8m
Limits on use
G189A
The TC closing stopper must be installed in all
cases.
The TA opening external stopper is only necessary
with the 180º opening mechanism (chain).
TC
TA

We recommend using an electrolock for leaf
lengths of over 2.5m.

Values for orientation purposes. The shape
of the leaf and the presence of strong wind
may bring notable differences in the values
of the chart.
MSB-018/00
E189A
9