Product Description - SOMFY LT 28 Guia De Instalacion

Product description

The LT28 motor is an wired motor dedicated to the interior roller blind.
This product cannot be used with sealed double glazing.
Safety
• This Somfy product must be installed by a professional motorisation and home automation installer, for whom these ins-
tructions are intended.
• Before installation, check that this product is compatible with the associated equipment and accessories.
• These instructions describe how to install, commission and use this product.
• Moreover, the installer must comply with current standards and legislation in the country in which the product is being ins-
talled, and inform his customers of the
operating and maintenance conditions for the product.
• Any use outside the sphere of application specified by Somfy is not approved. Such use, or any failure to comply with the
instructions given herein will invalidate the warranty, and Somfy refuses to accept liability.
SOMFY hereby declares that this product complies with the essential requirements and other relevant provisions of Directive
1999/5/EC. A Declaration of Conformity is available at the web address www.somfy.com/CE. Suitable for use in EU, CH and
NO
Never immerse the
motor in liquid!
Avoid impacts!
Characteristics
+60 °C
Nominal use :
-10°C / 60°C (14°F / 140°F) : 5,000 cycles
Restrictions :
-10°C / 0°C (14°F / 32°F) : 100 cycles
-10 °C
s
e
1
Do not drop it!
Never drill holes in
the motor!
cycle 1
Copyright © 2009 Somfy SAS. All rights reserved.
24V DC
> 20V
< 27V