Kuppersbusch FWK8800.0E Instrucciones De Uso E Instalación página 64

How to set temperature
The controls of your wine cooler (the upper zone and middle zone)

1) " " button
To control this unit's power,ON/OFF.
Press and hold this button for approximately 3 seconds.
2) " " button (left)
To set the temperature of the upper chamber.
Press once the button, the temperature will increase 1°C.
3) " " button (left)
To set the temperature of the upper chamber.
Press once the button, the temperature will decrease 1°C.
4) LED display window
Display temperature for upper zone.
5) " " indicator light
Compressor in operation display.
6) LED display window
Display temperature for middle zone.
7) " " button (right)
To set the temperature of the middle chamber.
(Press once the button, the temperature will increase 1°C.
8) " " button (right)
To set the temperature of the middle chamber.
Press once the button, the temperature will decrease 1°C.
9) " " button
To control the inner light turn on/off.
Setting the temperature control

Each cooling compartment of the wine cooler (upper & middle) is independently controlled. To set the
temperature:
 When pressing
middle compartment automatically. The LED will flashing and display the setting temperature.
 Press once the button, the temperature will decrease or increase 1°C. When exceeding the
minimum value that can be established, it will jump to the highest adjustable temperature value
automatically. After stopping pressing the button for 5 seconds, LED figure will stop flash, then
exit setting model.
Upper compartment::the temperature setting can be adjusted from 5°C to 18°C.
Middle compartment: the temperature setting can be adjusted from 5°C to 10°C.
or button, the system will be entering the set up mode in the upper or
64