ABB EOHU361JK Boletín De Instrucciones página 14

Installation
Knockouts
1
OR
1
Cable entry/exit, the knockouts for conduit hubs
The concentric knockouts for conduit hubs are provided
in the top and bottom of the enclosure EOHU361JK/_RK,
EOHU362JK/_RK and EOHU363JK/_RK (TYPE12 and 3R).
Choose the size and amount needed. Install the conduit hubs.
In catalog numbers EOHU361S/_SS, EOHU362S/_SS and
EOHU363S/_SS (TYPE 4X) the top and bottom of the enclosure
are blank for own holes. Check all parts for possible metal
shavings. Remove any shavings.
Catalog Cable entry/exit knockouts, top and bottom
number [ø inch]
EOHU361JK, _RK 3×(ø1+ø0.75+ø0.5+ø0.315)+
ø0.25+2×(ø0.19)
EOHU362JK, _RK 3×(ø1.25+ø1+ø0.75+ø0.5+
ø0.315)+ø0.25+ø0.8
EOHU363JK, _RK 2×(ø1.5+ø1.25+ø1+ø0.75+ø0.5)+
1×(ø2+ø1.5+ø1.25+ø1+ø0.63)+
ø0.25+ø0.8
1/10 Installation | Instruction Bulletin EOHU361/2/3JK/RK/S/SS, 1SCC340036M1401 / A
[ø mm]
3×(ø25.4+ø19.0+ø12.7+ø8.0)+
ø6.4+2×(ø4.9)
3×(ø31.8+ø25.4+ø19.0+ø12.7+
ø8)+ø6.4+ø20.4
2×(ø38.1+ø31.8+ø25.4+ø19.0+
ø12.0)+1×(ø50.8+ø38.1+ø31.8+
ø25.4+ø16.0)+ø6.4+ø20.4
CAUTION
The enclosure has to maintain the NEMA classification when installing
cable entry/exit. It is not allowed to do any other extra holes except
cable entry/exit to the enclosure.
No responsibility is assumed by ABB for any consequences arising out
of the installing of cable entry/exit or if any other extra holes done to the
enclosure.
CAUTION
HAZARD OF INJURY OR EQUIPMENT DAMAGE
Do not in any circumstances bend or twist the locking hook fixed on
the door. Wrong position of the door hook causes the malfunction of
the locking mechanism that may result in personal injury or equipment
damage.
Failure to follow these instructions can result in injury or equipment damage.
2