Operating The Light - SentrySafe Fire-Safe Manual Del Dueño

How to operate the light
The safe you have purchased may include a light. This is a long-lasting LED light. Not all safes
include a light.
The batteries that operate the keypad are the same batteries that operate the light. If the light in
your unit does not turn on, please change your batteries. Refer to page 4 to change the batteries.
The light will turn on every time you enter your code and will remain on for 30 seconds. The light
duration has three options – off, 30 seconds, and 60 seconds*.
*If the light duration is 60 seconds, the battery life will decrease at a faster rate.

Operating The Light

To turn the light off:
Press the "0" button.
1
Press the "P" button.
2
Press the "3" button.
3
To turn the light on for 30 seconds:
Press the "0" button.
1
Press the "P" button.
2
Press the "4" button.
3
To turn the light on for 60 seconds:
Press the "0" button.
1
Press the "P" button.
2
Press the "5" button.
3
10