Programmable Electronic Lock; Preparing Your Safe For First-Time Use - SentrySafe Fire-Safe Manual Del Dueño

NOTE: Store code and keys in a secure location (other than in the safe).
NOTE: SentrySafe offers a secure online location for the entry and retrieval of your code.
Go to registermysafe.com and register your safe.

Preparing your safe for first-time use

1
2
NOTE: Do not use rechargeable batteries or any other type of non-alkaline battery. Do not mix
old and new batteries. Do not mix alkaline and other battery types.
3
M100TEST
SN100TEST01*
12345
Unlocking your safe
WARNING
Test your code several times before putting valuables inside.
1

Programmable Electronic Lock

Ensure any shipping screws have been removed.
(Located on the inside of the door.)
Slide out the battery drawer on the side of the keypad.
A
Insert 4 AAA alkaline batteries (do not use rechargeable
B
batteries or other types of non-alkaline batteries).
Slide battery drawer back into keypad.
C
Find your code on the back of this owner's manual.
Remove key and store in a safe place.
Insert key into the lock, turn to the "unlocked" position,
then remove the key.
This is a secondary locking feature, not an override key.
Without the key you will not be able to open your safe.
4