Specifications And Accessories - Sammic HM-1900 Manual De Instrucciones

shows to need repairing by a technical service engineer. Remove the power
supply plug from wall outlet and call a Service Center.
- When the magnetron indicator in control panel lights, it shows that remai-
ning magnetron life became short. Call a Service Center to replace the mag-
netron before it becomes defective.
· On no account remove or interfere with any parts or screws.
"THIS COULD PROVE VERY DANGEROUS."
Make the following simple check-up before contacting a Service Centre:
· If the interior lamp does not light when one of the programme selection key
is touched.
1. Make sure that the mains lead is securely plugged in.
2. Check the fuse in the plug top and ensure the plug top is wired
correctly.
Note: The appliance must be protected by a fuse.
3. Make sure that the door is completely closed.
4. Make sure that a programme has been stored.
· Before changing the interior lamp, please confirm the power supply plug is
disconnected from the socket.
· If the interior lamp lights and the appropriate power select or preset cooking
indicator is illuminated but the food is not heated;
1. Make sure that the food is not completely covered with a metal
container.
· Abnormal noise during operation.
1. Make sure that sparking during microwave cooking is not caused by using
unsuitable utensils of metal or having metal bands or trimmings, or aluminum
foil or skewers.
2. Make sure that the tray is set in the oven properly.
3. Check whether foods or containers are touching inside walls of the oven.
· If smoke is observed, keep the oven door closed and switch off by discon-
necting the oven from the power supply.

SPECIFICATIONS AND ACCESSORIES

Specifications HM-1900
Microwave power output
Microwave frequency
Outer dimensions
Cavity dimensions
Weight
Accessories
Operating instruction
Plastic spacer
1900W - 190W
2450 MHz
422 x 560 x 335 mm
330 x 330 x 175 mm
32.5 kg
1
1
ENGLISH 15