Lutron LCP128 Serie Guia De Instalacion página 5

Panel Model Number Guide
GRAFIK Systems
Example
C C P - 1 X 4 L 2 T- 2 3 0 4 I S - C E - L C P - C G P _ _ _
Prefix Modules:
Quantity and
Type
Prefix
CCP = Custom combination panel
Module Types
_X _L _E _A _M _T
List modules in the order shown above. Insert the
quantity before each module code. Omit codes for
modules not used in panel. See table below for limits
on numbers of modules per panel.
X = Four-Circuit Switching (Relay) (XP)
L = Four-Circuit Dimming (4U)
E = Four-Circuit Electronic Low Voltage Dimming (4E)
A = Four-Circuit Adaptive Dimming (4A)
M = Four-Circuit Motor (4M)
T = 0-10 V, DALI (broadcast), DSI, and PWM
Ballast Control (TVM)
Feed Voltage
230 = 230 V (CE)
240 = 220-240 V (non-CE)
Feed Type
FT = feed-through panel (circuit breakers not included)
4IS = 3 phase 4 wire isolation switch
2M = 1 phase 2 wire input breakers (mini only)
4M = 3 phase 4 wire input breakers (mini only)
Module Quantity Limits
Panel Size Feed type
Mini Feed-through
Mini Feed-through
Mini Input breakers
Mini Input breakers
Standard Feed-through
Standard Input breakers
Standard Input breakers
Notes
• Consult Lutron for panels with custom breaker needs.
• TVM = 0 is a TVM-ready panel; TVM modules can easily be installed in the future.
• TVM = NA is not TVM-ready
(CCP/LCP) (230/220-240 V
TM
Feed Region
Voltage
Suffix
Feed
Type
TVM 4A
NA Any combination up to 3 modules
0-4 Any combination up to 2 modules; must have 1 4U or XP module minimum;
each 4U or XP module can control only 2 TVM modules
NA Any combination up to 3 modules
0-4 Any combination up to 2 modules;
must have 1 4U module minimum;
each 4U module can control only 2 TVM modules
0-12 Any combination up to 8 modules; must have 1 4U or XP module minimum;
each 4U or XP module can control only 2 TVM modules
0-12 Any combination up to 8 modules;
must have 1 4U module minimum;
each 4U module can control only 2 TVM modules
0-12 Any combination up to 6 modules; must have 1 4U or XP module minimum;
each 4U or XP module can control only 2 TVM modules
R
(continued)
only)
Custom
Panel Suffix
Controller
(contact Lutron for custom options)
Type
Region Suffix
CE = 230 V
AU = 220-240 V
Note: Should match feed voltage
Controller Type
Omit for single-link circuit selector
2L = 2Link circuit selector
TM
LCP = LCP128
Custom Panel Suffix (optional)
Indicates panel with special options
Frequency
(All Model Numbers and Voltages)
50/60 Hz
Output (Load) Ratings
Module Type Rating
XP 16 A per circuit
4U (230 V ) 13 A per module, 10 A per output
4U (240 V ) 16 A per module
4A 13 A per module, 8 A per output
4E 16 A per module, 10 A per output
4M 16 A per module, 5 A per output
(1/4 HP motor), 1 motor per output
TVM 50 mA per channel, 750 mA per system
4U 4E
Installation Guide for Dimming and Switching Panels
4M XP
0
0
0
5