Belkin OmniView ENTERPRISE Quad-Bus Serie Guía De Instalación Rápida página 3

P74291ea_F1DExxxC.qxd 30-10-2003 13:56
OmniView
ENTERPRISE Quad-Bus Series
KVM Switch with Micro-cabling Technology
Quick Installation Guide
Note: All diagrams show 2x16 model.
STEP 1: Remove the contents from the box.
STEP 2: Install the rack-mount brackets and place
the Switch on a rack.
Page 4
™
STEP 3: Decide whether the Switch will be used in a
single-unit configuration or in a daisy-chained
configuration. If the unit will be used in a daisy-chained
configuration, skip to Step 1 of "Daisy-Chain
Configuration" below. Otherwise, proceed to Step 4.
STEP 4: Connect the console keyboard, monitor, and mouse.*
(For mouse and keyboard, use PS/2 or USB or any
combination of both.)
*Note: Dual-console support available on 2x8 and 2x16 models only.
Hosts 1 & 2 Hosts 3 & 4