Stanley FatMax FMFP12703 Manual De Operación Y De Mantenimiento página 11

DIRECTIONAL EXHAUST DEFLECTOR
(FIG. 8)
Adjust directional exhaust deflector (A), so the
exhaust air blast will be directed away from the
operator. The exhaust deflector provides twelve
detented positions for directing the exhaust blast
away from the operator. Grasp the deflector and
rotate it to the desired position for the current
application.
NO-MAR PAD (FIG. 9, 10)
Disconnect tool from air supply before removing or re-installing
no-mar pad.
The no-mar pad (F) is provided to reduce marring of the work surface. The no-mar
pad can be removed, and stored on the End Cap, Magazine (M), to provide increased
depth-of-drive for toe-nailing applications.
Fig. 9
F
CLEARING A JAMMED NAIL (FIG. 1, 11–13)
Always disconnect air line from tool and remove fasteners
from magazine before making adjustments or personal injury may result.
If a nail becomes jammed in the nosepiece, keep the tool pointed away from you
and follow these instructions to clear:
1. Disconnect the air supply from the tool.
2. Depress pusher release (I) and slide pusher (H) all the way to the front of the
magazine.
3. Depress nail stop (E) and slide fasteners from magazine.
4. If nail is jammed between the driver and nose casting force driver blade back
to the top using a 1/4" (6.4 mm) punch and hammer. When the nail is released
it will fall free or can be removed using pliers.
Fig. 11
I
H
Fig. 8
Fig. 10
M
E
11 - ENG
A