Steam Ironing; Dry Ironing; Maintenance And Cleaning; Environment Protection - Jata electro CP830 Instrucciones De Uso

• set the iron temperature selector (3) to its maximum position (MaX) by turning it clockwise. If you
wish a lower temperature on the sole plate leave the temperature selector in ( ) position.
• plug the appliance into the mains and the indicator light (2) will light on.
• await until the pilot light (2) goes off. at this moment the appliance is ready to be used.

STEAM IRONING

• Remember that the iron temperature selector (3) must be set to its maximum position or in the
steam position ( ).
• press with the index finger the steam button (1) for the steam begin to flow. It is advisable to use
the button in short intervals.
ATTENTION:
• When pressing the steam pusher the pump starts to pass water intermittently to the
steam chamber. This intermittent noise of the pump is absolutely normal.
• You can fill the tank at any moment bearing in mind that you must unplug the appliance from the
mains while doing it. If you have the precaution for keep the tank always with water, the appliance
can work in a continuous way, without need of waits, this appliance becomes irreplaceable for any
type of ironing, including thick garments or great dimensions.
• You can also iron curtains and other garments vertically without needing to take them down. Bring
near the iron in vertical position to the garment and press the steam outlet button (1).

DRY IRONING

• plug the appliance into the mains and set the temperature selector (3) in the desired position.
• FIBRAS SINTÉTICAS / SINTHETIC FIBRES: Soft temperature (•)
• SEDA – LANA / SILK – WOOL: Medium temperature (••)
• ALGODÓN – LINO / COTTON – LINEN: High temperature (•••)
• When the indicator light (2) is switch off, the iron has reached the selected temperature.
• Do not press the steam pusher.
TRANSPORT HANDLE
• The appliance includes a handle to move the unit easily. To open just lift it up. To storage, keep
pressed the two pushers (6) and place it in its original position.

MAINTENANCE AND CLEANING

• Before you proceed to cleaning the appliance, ensure it is unplugged from the mains.
• Do not empty the water thank may kept in the tank, unless you are not going to use the appliance
for a long time.
• Do not use chemical or abrasive products, such as metallic scourers, which may deteriorate the
surfaces of the appliance.
• Use a slightly damp cloth.
• The soleplate may be cleaned with a cloth soaked with vinegar. This whole operation is more easily
carried out when the soleplate is warm.
• after using the appliance wait for the iron to cool before storing.

ENVIRONMENT PROTECTION

• Dispose the appliance according to the local garbage regulations.
• Never throw it away to the rubbish. so you will help to the improvement of the
environment.
13