Dry Ironing; Maintenance And Cleaning; Environment Protection - Jata electro PL619C Instrucciones De Uso

• Press the spray button (1). In case no water should come out, press the button again.

DRY IRONING

• If there is water in the tank, set the adjustable steam knob (3) to the off position (0).
• Plug the iron into the mains and place the selector (6) in the desired temperature for each fabric:
- FIBRAS SINTÉTICAS : SINTHeTIC FIBReS: low temperature ( )
- SeDA – lANA : SIlK – Wool:
- AlGoDÓN – lINo : CoTToN – lINeN:
AUTO-CLEANING SYSTEM
• Set the adjustable steam knob (3) to the off position (0).
• Pour water into the tank.
• Set the temperature selector (6) to MAX position and plug the iron to the mains.
• As soon as the indicator light (7) is off, place the iron in a horizontal position on a plate or suitable container in
the sink and remain pressed the auto-cleaning (9) button. The steam and drops of water will begin to flow from
the orifices in the base of the iron draining the dirt and particles.

MAINTENANCE AND CLEANING

• Before you proceed to cleaning the appliance ensure the appliance is unplugged from the mains.
• The sole plate can be cleaned with a cloth soaked with vinegar. This whole operation is more easily carried out
when the sole plate is warm.
• The exterior parts of the iron may be cleaned with a slightly dampened cloth.
• Do not use abrasive or chemical products, metallic scourers, which may deteriorate the surfaces of the appliance.
• To store the iron, ensure there is no water left in the tank, set the steam control to the off position (0) and always
store in a vertical position.

ENVIRONMENT PROTECTION

• Dispose the appliance according to the local garbage regulations.
• Never throw it away to the rubbish. So you will help to the improvement of the environment.
Medium temperature (
High temperature (
12
)
)