Laser Safety
This machine complies with the requirements of IEC60825-1:2007 (EN60825-
1:2007) for class 1 laser product. The machine contains two AlGaInP laser
diodes, 657-663 nanometer wavelength. The beam divergence angle is 16
degrees (minimum) and 23 degrees (maximum) in the vertical direction, and
7 degrees (minimum) and 11 degrees (maximum) in the horizontal direction,
and laser beams are generated in Continuous Wave (CW) mode. The maximum
output power of the light source is 15 milliwatt.
The following label is attached on the rear side of the machine:
Caution:
Use of controls or adjustments or performance of procedures other than those
specified in this manual might result in hazardous radiation exposure.
13