Other Information For This Machine; Laws And Regulations; Legal Requirements; Laser Safety - Ricoh Pro C5300S Manual Del Usuario

3. Other Information for This Machine

Laws and Regulations

Duplication and Printing Prohibited
Do not copy or print any item for which reproduction is prohibited by law.
Copying or printing the following items is generally prohibited by local law:
bank notes, revenue stamps, bonds, stock certificates, bank drafts, checks, passports,
driver's licenses.
The preceding list is meant as a guide only and is not inclusive. We assume no responsibility
for its completeness or accuracy. If you have any questions concerning the legality of copying
or printing certain items, consult with your legal advisor.

Legal Requirements

Laser Safety

For Pro C5300S/C5310S
CDRH Regulations
This equipment complies with requirements of 21 CFR Subchapter J for class I laser product.
This equipment contains two VCSELs (Vertical Cavity Surface Emitting Laser), 772–792
nanometer wavelength for each emitter. The beam divergence angle is 5.5 degrees (minimum)
and 7.9 degrees (maximum) in the vertical direction, and 5.5 degrees (minimum) and 7.9
degrees (maximum) in the horizontal direction, and laser beams are generated in Continuous
Wave (CW) mode. Each VCSEL has forty light sources and the maximum output power of
each light source is 1.23 milliwatt.
Caution
Use of controls or adjustments or performance of procedures other than those specified in
this manual might result in hazardous radiation exposure.
For Media Identification Unit Type S3
CDRH Regulations
Media Identification Unit (optional) complies with the requirements of IEC60825-1:2014
(EN60825-1:2014) for class 1 laser product. Media Identification Unit contains one VCSEL
(Vertical Cavity Surface Emitting Laser), 772–792 nanometer wavelength. The beam
divergence angle is 5.3 degrees (minimum) and 7.9 degrees (maximum) in the vertical
direction, and 5.3 degrees (minimum) and 7.9 degrees (maximum) in the horizontal direction,
and laser beams are generated in Continuous Wave (CW) mode. The VCSEL has twelve light
sources and the maximum total output power is 2.5 milliwatt.
Caution
Use of controls or adjustments or performance of procedures other than those specified in
this manual might result in hazardous radiation exposure.
18