Kohler K-98741-K1 Guía De Instalación Y Cuidado página 8

Pipe Nipple
Light Panel Assembly
5. Install Pipe Nipples and Light Panel
CAUTION: Risk of personal injury. If the rain panel is not securely held in place during
installation, the product may fall. Get help installing the light panel assembly and waterways.
Remove the nipples.
Apply thread sealant to the threads of the nipples.
Reinstall the nipples to the tees/elbows.
Run water through the system to flush out any dirt or debris.
IMPORTANT! The following steps require two people.
Lift the light panel up to the installation location and attach the pre-routed chroma power cable to
the light panel assembly.
Insert the light panel into the rough opening of the finished ceiling and hold in place. The light
panel must be supported until it is secured by installing the adapters.
1235394-2-A
Finished Ceiling
Chroma
Power Cable
8 Kohler Co.