Dauphin Permanent-Balance Office Manual De Instrucciones página 16

F
u n c t i o n
Backrest height
Press the adjustment button
lock. Adjusting the backrest height permits individual positioning
of the lumbar support. Set the centre of the lumbar support
(where the upholstery is thickest) at about waist height. Only
in this position is the natural curve of the spine stabilised and
unnatural postures (hollow or rounded back) can be avoided.
Option: Lumbar support
Swivel chair: An adjustable lumbar support (3,5 cm
y
in depth) ensures optimum support of the lower back,
tailored to the size of the user.
Setting the curvature of the lumbar support:
Adjustment range: Depth adjustment of 3,5 cm by turning the
handwheel. Setting the backrest: Set to desired position by
means of height adjustment feature.
Turn the handwheel
the backrest curvature to your personal requirements. When
you lean back against the backrest, you should feel an evenly
distributed counterpressure in the lumbar region.
16
x
in the backrest to release the
y
on the side of the backrest to adjust