8
WARNINGS
To avoid the risk of a shock hazard:
Do not plug the power cord of the PowerPark dock or PowerPark stand
module into a multiple portable socket outlet (MPSO) or use an extension
cord.
Make sure the AC power cord is disconnected from the PowerPark stand
module whenever the stand is docked.
To avoid the risk of electrical shock and possible fire:
Use only properly grounded equipment. Shock hazards exist if the power
supply is not properly grounded. Grounding reliability can only be achieved
when the equipment is connected to a receptacle marked "Hospital Only,"
"Hospital Grade," or the equivalent. The grounding wire must not be
removed or circumvented.
Use only accessories and peripherals recommended by Fujifilm Sonosite,
including the power supply. Use the PowerPark only within the voltage and
current limits specified on its ratings label.
Inspect the power supply, plugs, cables, and power cords on a regular basis
for damage.
Do not place the PowerPark dock in a wet environment.
To avoid system malfunction and the risk of electrical shock, follow the
PowerPark assembly instructions.
Safety