Gardena EasyCut Li-18/23 Instrucciones De Empleo página 9

Recortabordes con accu
Ocultar thumbs Ver también para EasyCut Li-18/23:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 41
2 Preparation
a) Before use check the supply and extension cord for signs of damage or
aging. If the cord becomes damaged during use, disconnect the cord
from the supply immediately. DO NOT TOUCH THE CORD BEFORE
DISCONNECTING THE SUPPLY. Do not use the machine if the cord is
damaged or worn.
b) Before use, always visually inspect the machine for damaged, missing or
misplaced guards or shields.
c) Never operate the machine while people, especially children, or pets are
nearby.
3 Operation
a) Keep supply and extension cords away from cutting means.
b) Wear eye protection and stout shoes at all times while operating the machine.
c) Avoid using the machine in bad weather conditions especially when there is
a risk of lightning.
d) Use the machine only in daylight or good artificial light.
e) Never operate the machine with damaged guards or shields or without guards
or shields in place.
f) Switch on the motor only when the hands and feet are away from the cutting
means.
g) Always disconnect the machine from the power supply (i.e. remove the plug
from the mains, remove the disabling device or removable battery)
1) whenever the machine is left unattended;
2) before clearing a blockage;
3) before checking, cleaning or working on the machine;
4) after striking a foreign object;
5) whenever the machine starts vibrating abnormally.
h) Take care against injury to feet and hands from the cutting means.
i) Always ensure that the ventilation openings are kept clear of debris.
4 Maintenance and storage
a) Disconnect the machine from the power supply (i. e. remove the plug from the
mains, remove the disabling device or removable battery) before carrying out
maintenance or cleaning work.
b) Use only the manufacturer's recommended replacement parts and acces sories.
c) Inspect and maintain the machine regularly. Have the machine repaired only
by an authorized repairer.
d) When not in use, store the machine out of the reach of children.
Additional safety warnings
Battery safety
DANGER! Fire risk!
The battery to be charged must be placed on a nonflammable, heat
resistant and non­conductive surface while charging.
The battery must not be charged unattended.
The supply terminals are not to be short­circuited.
Keep corrosive, flammable and easily combustible objects clear of the
battery charger and the battery.
Do not cover the battery charger and the battery while charging.
Disconnect the battery charger immediately in the event of smoke formation or
fire.
Only use GARDENA batteries for the GARDENA battery product. GARDENA
cannot accept any liability for the batteries of other manufacturers. If they are of
minor quality, they could cause a fire or explosion hazard!
Do not use the GARDENA charger to charge external rechargeable batteries,
as GARDENA cannot guarantee compatibility and could therefore present a risk
of fire or explosion.
Do not charge non-rechargeable batteries.
DANGER! Risk of explosion!
Protect batteries from heat and fire. Do not leave on radiators or expose
to strong sunshine for long periods.
Do not operate in explosive atmospheres, such as in the presence of
flammable liquids, gases, or dust. Batteries may create sparks which
could ignite the dust or fumes.
Check your battery before each use. Visually check the battery before each use.
A non-functioning battery must be disposed of correctly. Do not send by post.
For further details, please contact your local disposal companies.
For risks of injury do not use the battery as a power source for other products.
Only use the battery for the GARDENA product intended.
Only charge and use the battery in ambient temperatures of between 0 °C and
40 °C. Allow battery to cool down after long periods of use.
Check the charging cable regularly for signs of damage or ageing (brittleness).
Only use it in perfect condition.
Do not stow or transport the battery above 45 °C or in direct sunlight. Ideally, the
battery should be stored below 25 °C so that self-discharge is low.
Do not expose the battery to rain, water (immersion) or wet conditions.
Keep battery in order (clean) especially air vents.
If usage of the battery is not planned for a certain time (winter period) reload
the battery to avoid a deep discharge.
9876-20.960.03.indd 9
Do not store the battery in a product to prevent self-discharge, misuse and
accidents.
Do not store the battery in places where static electricity is present.
Electrical safety
DANGER! Cardiac arrest!
This product makes an electromagnetic field while it operates. This field
may under some conditions interfere with active or passive medical
implants. To decrease the risk of conditions that can possibly injure or
kill, we recommend persons with medical implants to speak with their
physician and the medical implant manufacturer before you operate the
product.
Only use the battery product between 0 °C and 40 °C.
Disconnect the battery in case of emergency.
Do not use the product nearby a water, or for pond care.
Personal safety
DANGER! Risk of suffocation!
Small parts can be easily swallowed. There is also a risk that the poly­
bag can suffocate toddlers. Keep toddlers away when you assemble the
product.
In case of heavy vibration replace the blade and check the blade holder for
damages.
Check the wear rib if ok before usage.
Transport on front handle.
Use personal protective equipment.
Wear gloves for cleaning the cutting device.
Always wear eye protection.
Protective equipment such as gloves, non-skid safety shoes, or hearing pro-
tection used for appropriate conditions will reduce personal injuries.
Be careful during adjustment of the product to prevent entrapment of the
fingers between moving and fixed parts of the machine, or while assembling
the protective cover.
Don't use water, or chemical substances for cleaning the guard or other parts
of the trimmer.
Keep all nuts, bolts and screws tight to be sure the product is in a safe working
condition.
Do not disassemble the product further than the delivery status.
Warning! When wearing hearing protection, and due to the noise produced by
the product, the operator may not notice persons approaching.
While operation and transport pay special attention to the hazard for other
people.
Stay alert, watch what you are doing and use common sense when operating
a power tool.
Do not use a power tool while you are tired or under the influence of drugs,
alcohol or medication.
A moment of inattention while operating power tools may result in serious
personal injury.
2. ASSEMBLY
DANGER! Risk of injury!
Cut injury when the product starts accidentally.
v Wait for the plastic blades to stop and remove the battery
before you assemble the product.
To assemble the protective cover and the plant guard
[ Fig. A1 / A2 ]:
DANGER!
v The product may only be used when the protective cover is
assembled.
1. Slide the front part of the protective cover
until it engages.
2. Slide the rear part of the protective cover
until it stops.
3. Tighten the both screws
(4)
carefully.
(5)
4. Slide the plant guard
onto the trimmer head
To attach the plastic blade to handle [ Fig. A3 ]:
The scope of delivery includes 5 plastic blades
tic blades in the openings
(9)
on the handle.
For the assembly of the plastic blade into the blade holder, see
6. TROUBLESHOOTING To replace the plastic blade.
(3)
onto the trimmer head
(1)
(2)
onto the trimmer head
(1)
(1)
until it engages.
(8)
. There are 4 spare plas-
9
11.10.19 07:55

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Comfortcut li-18/2398769878

Tabla de contenido