Pari Easy Care Manual Del Usuario página 11

4 Preparation and assembly
4.1 Open the easycare cleaning aid
4.2 Install the aerosol head and close the easycare reservoir
4.3 Connect the easycare cleaning aid to the eBase Controller
4.4 Filling
• To open press lightly on the lateral gripping surfaces.
• Separate the parts.
• The aerosol head must be felt to snap into
place upon insertion. Please take care to
ensure proper orientation.
• When closing ensure that the two lateral
engaging hooks are felt to snap into place.
• Attach the nebuliser connector of the connec-
tion cord to the hinge of the easycare reservoir
and swivel it downwards, so that the metal
contacts engage.
• Connect the other end of the cable to the
eBase Controller.
• Fill approx. 5 ml backwash liquid into the
easycare funnel opening.
en
11