Technical Data; General Warnings; Correct Usage - Rupes LH16EN Instrucciones Original De Uso Y Manutención

TECHNICAL DATA

PROTECTION CLASS
OPERATING VOLTAGE
ABSORBED CURRENT
ABSORBED POWER
ELECTRONIC OVERLOAD PROTECTION
ELECTRONIC SPEED CONTROL
ROTATION RPM
BUFFER PAD AND BUFFER DIAMETER MAX mm
SPINDLE THREAD
WEIGHT Kg

GENERAL WARNINGS

SAFETY AND ACCIDENT PREVENTION INSTRUCTIONS
The safety and accident prevention instructions are reported in
the "SAFETY INSTRUCTION" booklet which forms an integral part
of these documents; the operating instructions indicate the
additional information required specifically for use of the tool.
Never use the tools without the safety guards (5-6-12).
Any operations carried out on the tool must be effected with the
power supply disconnected.
Before starting the tool, ensure that it is held tightly and not in
contact with the work surface.
Hazardous dust may form during use regulation safety devices for
personal protection and observe safety norms valid for the
processed work material.
Due to risks that may arise during polishing, we recommend the
constant use of P .S.D. (personal safety devices such as gloves,
8
TYPE LH16EN
230 V - 50 Hz
4,3 A
900 W
YES
YES
700 ÷ 1.700
200
M14
1,9
headphones, goggles, face masks, etc.) according to laws in for-
ce to prevent or reduce accident probability.
Warning! the appliance continues to work for a few seconds after
it has been switched off!

CORRECT USAGE

The tools must only be used for polishing painted surfaces.
The tools must be used in a dry environment only.
Before use make sure that the disc pad work specifications are
compatible to the tool and are not broken or worn. Make sure
they are assembled, handled and stored with care according to
the manufacturer's instructions.
Make sure the work piece is sufficiently fastened.
The user bears sole responsibility for any damage or accidents
resulting from incorrect use.
ENGLISH
LH18EN
II II
230 V - 50 Hz
5,3 A
1100 W
YES
YES
750 ÷ 1.850
200
M14
2
8